ODE-F122-AW PAT.P
Microcontroller-equipped models (Forced air cooling）
Dehumidification capacity: 22ml/h, Prevents insulation failure by short-circuit and malfunction led from high humidity or condensation
Features
- Energy saving operation mode
- Temperature and relative humidity data recording
- Enabled dehumidication under low temperature
- Easy installation
Application
- For control panels
- For storage cabinets
- For facilities in heavy-snow region
Model/Specification
| Model |
ODE-F122-AW |
| Dehumidification capacity (*1) |
22ｍｌ/h |
| Rated voltage |
Single phase, 85 - 264V AC |
Rated power
consumption |
In continuous operation |
40W |
In automatic operation
(Energy saving operation) |
2W |
| Working temperature |
0 to 55 ℃, ice-free |
| Working humidity |
Max. 95％RH |
| Operation mode |
Continuous/Automatic (Energy-saving) |
| Humidity setting for automatic operation |
To run in 50% or higher and stop below 50% |
| Function |
・Detection of high temperature at radiation part・・・
When radiation part has reached +80℃
・Detection of thermoelectric module error・・・
When current value of the thermoelecric module has dropped
・Detection of abnormal working temperature・・・
When operation has stopped beyond the working temperature range
（Below 0℃ or beyond ＋60℃）
・Detection of temperature sensor disconnection・・・
When temperature sensor caused wire disconnection |
| Error output |
Contact capacity 24V DC 300mA 1a |
| Power connection method |
Power cable Triplex, 2m |
| Noise |
Approx. 49dB(A) |
| Site of use |
Indoor only |
| Accessories |
Drain hose 1.5m x 1, Alarm harness 0.5m x1, Instruction manual 1 copy |
| Environmental conformity |
RoHS |
| Dimensions (*2) |
Ｗ132×Ｈ250×Ｄ66 |
| Weight |
1.8ｋg |
- Nominal value with ambient humidity of 80%RH at 30℃
- Drain pipe, cable and mounting stay are excluded
Performance chart
- The above chart shows correlation of internal humidity and cubic measure of an enclosure under the condition at 100% relative humidity and 30℃ temperature outside the enclosure on condition that the enclosure has no vent, its door is hermetically sealed and not opened more than one time a day. ）
Outline dimensions
Structural drawing
Installation drawing
|
