Drain evaporator “EVAPRO”
Ultrasonic atomization type OCJ-M060-AW
Water is turned into atomized particles by means of an ultrasonic transducer.
Features
- Small size!
- Meets wide range of supply voltage (100 to 240VAC)
- Energy saving! (Achieved 85% reduction from heater type)
- Recessed mounting is enabled!
- Contact output for overflow!
- For other details, please go to “Product outline”.
Application
- Atomization type is suitable for large amount of water from enclosure coolers.
Specifications
| Model |
OCJ-M060-AW |
| Processing method |
Ultrasonic atomization |
| Type of mounting |
Lateral, Recessed or Stationary mounting |
| Treatability （※1） |
650ml/h |
| Rated voltage |
Single phase, 100VAC-240VAC ±10％ |
| Stand-by time power consumption （※2） |
5W |
| Operating time power consumption（※2） |
82W |
| Working temperature |
＋10 to ＋50℃ |
| Working humidity |
85％RH or less, Free from condensation |
| Atomization operation |
ON/OFF by float switch |
| Protective function |
Overflow detection |
| Error output |
1 contact output for overflow |
| Noise |
52dBA |
| Site of use |
Indoor only |
| Secondary drain pipe dia. |
13 mm |
| Safety／Environmental standard |
- ／RoHS |
| Outline dimensions (mm)（※3） |
W350×H200×D200 |
| Weight（※4） |
6.5kg |
- Drainage processing capability at 30℃ambient temp. and 60％RH.
- Maximum value within the working temp. range
- Excluding projections
- Weight in the dry state
Performance chart
Dimensions (in mm)
Mounting cutout (Views seen from outside the cabinet)
Structure
Atomization of drainage water is caused by ultrasonic transducer and the atomized particles are discharged by the fan to evaporates in the air.
